Eliminate brake fade! 1965-67 Mustang front disc brake coolers work with any factory or aftermarket Kelsey Hayes 11" 4 piston disc brakes to provide airflow to the inside of the brake hub in high performance applications. Cooling plates replace the factory dust shield and allow the use of 2.5" cooling duct to be ran from the front of the vehicle. Will also work with 68+ DRUM spindles and K/H-style 4-piston calipers.
Raw steel.
Standard Kit Includes:
1 Pair Cooling Plates
Complete Kit Includes:
1 Pair Brake Cooling Backing Plates
1 Pair 2.5" High-Temp Silicone Air Duct (3 ft each)
1 Pair 2.5" hose clamps
Brake cooler backer plates replace factory disc brake backer plates and are installed between the caliper bracket and the spindle. Must mount the front of the cooling ducts to an R-Model front apron with 2.5” inlets, custom 2.5” inlets with the factory valance, or 2.5” scoops under the valance (not included).
Installation Guide
Eliminate brake fade! 1965-67 Mustang front disc brake coolers work with any factory or aftermarket Kelsey Hayes 11" 4 piston disc brakes to provide airflow to the inside of the brake hub in high performance applications. Cooling plates replace the factory dust shield and allow the use of 2.5" cooling duct to be ran from the front of the vehicle. Will also work with 68+ DRUM spindles and K/H-style 4-piston calipers.
Raw steel.
Standard Kit Includes:
1 Pair Cooling Plates
Complete Kit Includes:
1 Pair Brake Cooling Backing Plates
1 Pair 2.5" High-Temp Silicone Air Duct (3 ft each)
1 Pair 2.5" hose clamps
Brake cooler backer plates replace factory disc brake backer plates and are installed between the caliper bracket and the spindle. Must mount the front of the cooling ducts to an R-Model front apron with 2.5” inlets, custom 2.5” inlets with the factory valance, or 2.5” scoops under the valance (not included).
Installation Guide
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
